How to install J320HXXU0APC5 Android 5.1.1 Lollipop on Galaxy J3 J320H

Hello buddy Samsung has recently launched its latest security update for the device, again based on updated firmware 5.1.1 Lollipop for Galaxy Android J320HXXU0APC5 J3 J320H now have available, if you can not wait to see the latest firmware update on your device, you can follow the guide below to update, in which case our guide will help you download and install the Android 5.1.1 Lollipop J320HXXU0APC5 in Galaxy J3 J320H. Android 5.1.1 firmware for the Galaxy J3 Lollipop J320HXXU0APC5 J320H including many of the latest features along with the latest security patches and fixes performance.

Android 5.1.1 Lollipop firmware for Galaxy J3 J320H J320HXXU0APC5 available via OTA or Kies so what do you wait and update your device with the latest firmware. Please note the quickie Odin capable firmware (tar) is available as a firmware file other so you have to be careful during the installation procedure.

J320HXXU0APC5 firmware details:
Device Name: Samsung Galaxy J3
Device Model:SM-J320H
Android Version: 5.1.1 Lollipop
PDA:J320HXXU0APC5
Build Date:

How to install J320HXXU0APC5 Android 5.1.1 Lollipop on Galaxy J3 J320H

Create Backup your Samsung device
Preparing the device for the firmware update process
The battery must be charged or at least your device must contain at least 80% before surgery to blink.
Android USB drivers for your device must be installed on your PC, or you can download the USB drivers for Samsung
Enable USB debugging, check Allow Mock Area selection as well. To enable USB debugging on your device go to Settings >> >> Developer options USB debugging. USB debugging is intended for development purposes then it will prompt you for confirmation so press OK to confirm.
If the "Developer options" do not look at the settings menu, you have to do is, go to Settings >> Devices >> Software update and there you will see an option to build numbers. Touch 7 times until a pop up window appears with the message that you're a developer, which now go back and look at the Developer options menu setting
Once you are done with the preparation of the above it is time to flash the Android 5.1.1 firmware on Galaxy J3 Lollipop J320HXXU0APC5 J320H.

HOW TO INSTALL ANDROID 5.1.1 J320HXXU0APC5 LOLLIPOP ON GALAXY J3 J320H VIA ODIN

Take J320HXXU0APC5 Android 5.1.1 Lollipop for Galaxy J3 J320H. Click here
To update the Galaxy J3 J320H to Android 5.1.1 Lollipop firmware J320HXXU0APC5 you need to download and extract Odin flash tool on the PC. You can download Odin 3.10.6 of the links below are provided.
Download Odin 3.10.6
Click Odin.exe file in the extracted folder to run the Odin tool.
Now turn off the device and boot into Download Mode. Now turn on your device by pressing and holding the Home Button + Volume Down + Power Key simultaneously until you see the logo warning now press the Volume up to boot your device into Download Mode.
Download Mode is the zone in which you do things related installations, now connect your phone to a PC via a USB cable.
You will be given notice of a successful connection. ID: COM boxes will turn blue indicating that your device is now being detected by Odin.
Now click the Options tab in the Odin screen and make sure the "Auto Reboot" and "F.Reset Time" option checked on Odin.
Upon completion of the above steps now we return to the main task, click the tab and choose Tar AP (Firmware) file that you download above.
Now click on Start and wait until the firmware installation process is complete.
You will see a "PASS" message in the ID: COM box after the firmware installation process is done by Odin.